Couldn't find these online anywhere so they've been uploaded. ; )
Third Strike poster
Promotional Material
Friday, 9 April 2010
Street Fighter 3 : Third Strike Arts : Capcom 1999
ストリートファイターⅢ サードストライク : Street Fighter 3 Third Strike
Couldn't find these online anywhere so they've been uploaded. ; )
Third Strike poster
Promotional Material
Couldn't find these online anywhere so they've been uploaded. ; )
Third Strike posterPromotional Material
Tuesday, 30 March 2010
Deathsmiles II POS arcade PC
デススマイルズ2
Shit looking game. Shit looking hardware, but it actually plays OK. ^_^
Motherboard: ASUS M3A78-EM Socket AM2+/AM2, Micro ATX format
CPU: AMD Athlon 64 X2 5050e Brisbane 2.60GHz, 1024KB L2 Cache
RAM: 2048MB (2GB) 800MHz DDR
Pics below ourtney of Super Pang @ ArcadeOtaku.
http://www.cave.co.jp/gameonline/deathsmiles2/index.html
Shit looking game. Shit looking hardware, but it actually plays OK. ^_^
Motherboard: ASUS M3A78-EM Socket AM2+/AM2, Micro ATX format
CPU: AMD Athlon 64 X2 5050e Brisbane 2.60GHz, 1024KB L2 Cache
RAM: 2048MB (2GB) 800MHz DDR
Pics below ourtney of Super Pang @ ArcadeOtaku.
http://www.cave.co.jp/gameonline/deathsmiles2/index.html
Tuesday, 16 March 2010
Passive JAMMA auto fire circuit
A passive auto fire circuit built around a 74HC04 Hex inverter. Not truly passive but does not require and additional 5 or 12 v from the JAMMA harness.
Original circuit. (courtesy of emphatic, purchased from Yahoo Japan auctions)
Schematic derived from the above
PCB layout. Due to the cost involved in manufacturing PCBs is probably isn't worth the cost, anyway it only took 10 minutes to knock up. PCB size, 40 x 28mm. ^_^
Completed circuit assembled on Veroboard with spade connectors for easy installation.
Prototype circuit next to a ¥100 coin for size reference. The 10k pot adjusts the rate from zero to around 60Hz.
Both the above circuits were constructed with 2 x 100u Capacitors due to stock shortages. The circuit still works but the results aren't quite as good.
Original circuit. (courtesy of emphatic, purchased from Yahoo Japan auctions)
Schematic derived from the above
PCB layout. Due to the cost involved in manufacturing PCBs is probably isn't worth the cost, anyway it only took 10 minutes to knock up. PCB size, 40 x 28mm. ^_^
Completed circuit assembled on Veroboard with spade connectors for easy installation.
Prototype circuit next to a ¥100 coin for size reference. The 10k pot adjusts the rate from zero to around 60Hz.
Both the above circuits were constructed with 2 x 100u Capacitors due to stock shortages. The circuit still works but the results aren't quite as good.
Sunday, 7 March 2010
Tuesday, 16 February 2010
DoDonPachi DaiOuJou : PGM : Cave 2002
怒首領蜂 大往生
DoDonPachi DaiOuJou marquee
Poster
Black Label Flyer
Various images of the PCB case
Close up of the fan connector and volume control.
Various images of the PCB.
There is space behind the battery for a service menu switch. This was probably omitted due to the board being in a case.
PCB revision IGS PCB-0389-02-FX. Made in Taiwan is not something you expect to see on a Japanese arcade PCB.
Comparison shot with Ketsui, left.
DoDonPachi DaiOuJou marquee
Poster
Black Label Flyer
Various images of the PCB case
Close up of the fan connector and volume control.
Various images of the PCB.
There is space behind the battery for a service menu switch. This was probably omitted due to the board being in a case.
PCB revision IGS PCB-0389-02-FX. Made in Taiwan is not something you expect to see on a Japanese arcade PCB.
Comparison shot with Ketsui, left.
Subscribe to:
Posts (Atom)
