Wednesday, 1 January 2014

SSF2X Conversion : Capcom : 1994

 スーパーストリートファイター2 X : Super street fighter 2 X :


Convert any CPS2 board in to a SSF2T or SSF2X without the need for the daughter board. >_<

Extract from the nfo file;

Requirements

A working CPS2 B-board with battery removed and security keys erased. If you
already have a board which runs a "phoenixed" game, then this will do fine. I'd
advise you not to kill a working board to do this, but it's your choice I
suppose.

A BGS-B3G (aka "G" PAL) chip for the socket marked BGSB3. The jumpers on the
board need to be soldered as follows (S = soldered, O = open):

SOOS_SO_OSOSOS_SOSOSOSO_SOSOSOSO

EPROMs as follows:

For ROMs 01, 02                               :  2 x 27C010  or 27C1001
For ROMs 03, 04, 05, 06, 07, 08, 09 :  7 x 27C4096 or 27C4002 or 27C240
For ROMs 11, 13, 15, 17, 19              :  5 x 27C322

Thanks to idc @ Team Avalaunch for making this possible.

Download the archive here.

For any other CPS2 needs head over to idc's site the CPS2 Decryption Project.

4 comments:

  1. The thing that was great about the Phoenix version of SSF2X was that you can allow legit SSF2X boards to have Free Play Mode by swapping B boards on the same A board after configuration(must be Phoenix green board to legit green board.) Any possibility to add this on permanently?

    ReplyDelete
  2. Is it possible to do this on a board with an F pal like Progear?

    ReplyDelete
  3. Yes, if your board has an F PAL you'll have to add a wire from as seen on the Progear bootleg page.

    If your board is currently running Progear you're good to go.

    ReplyDelete